If you want to send your pre-order,
please download the file by clicking on the "PRE-ORDER" button.

Upon completion of all technical details, upload the form on this website.
To do so, use the button "UPLOAD FORM" on the right.

Our team will take care of your request and contact you again.

*If you cannot find an E-mail response in your mailbox, please check your Spam folder. You can always contact us with any additional inquiries via the Contact Form on our Homepage. Thank you!
Pronamic
®
Parts

Modern technology

For Your Success

Fully automatic hardfacing

Computer assisted monitoring

Intensive quality testing

Hard surface applied

Pronamic
®
Parts

Modern technology For your Success

Up to 42% longer lifetime

Most environmentally compatible

Less energy consumption

Ready or in-situ hardfacing

Up to 42% longer lifetime
Most environmentally compatible
Less energy consumption
Ready for in-situ hardfacing
Pre-Order Now

Pronamic

®

Parts

Specifications
H1
Composite tires and grinding plates (tough structural steel base with successive welded-on layers)

• Datasheet
• technology comparison sheet
H2 Multilayer
Composite tires and grinding plates. Similar to H1, however using nobler alloys for even longer service life

• Datasheet

• technology comparison sheet
Variants
Type 1: for cement raw material
Type 2: for OPC/composite cement, blast furnace slag/slag cements/fly ash-containing mixes
Type 3: for hardcoal/lignite/ anthracite/petcoke
Type 1: for cement raw material
Type 2: for OPC/composite cement, blast furnace slag/slag cements/fly ash-containing mixes
Type 3: for hardcoal/lignite/ anthracite/petcoke
Service Life Factor: relative to Ni-Hard IV (factor x1)
x1.5
x2.24
Specifications
H1 wire
Pronamic® H1 wire is a self-shielded flux-cored wire for welding. The undiluted deposit contains dense and uniform distribution of primary chromium carbides and eutectic carbides of the M7C3 type. The surface appearance is typical for this type of hardface, with a family of stress-relief cracks (“checkcracks”).

Product Datasheet
H2 wire
Pronamic® H2 wire is a self-shielded flux-cored wire for welding. The undiluted deposit contains dense and uniform distribution of primary chromium carbides, vanadium carbides and eutectic carbides of the M7C3 type. The surface appearance is typical for this type of hardface, with a family of stress-relief cracks (“check cracks”).

Product Datasheet
T2 wire
Pronamic® T2 wire is a self-shielded flux-cored wire for welding. The undiluted deposit contains dense and uniform distribution of primary chromium carbides and complex niobium, molybdenum, tungsten and vanadium carbides. The surface appearance is typical for this type of hardface, with a family of stress-relief cracks (“check cracks”).

Product Datasheet
EN
DE ES PT EN